All That You Wanted To Know About Batteries And Reconditioning!  

We use rechargeable batteries everyday through our laptops, cordless phones, mobiles, vehicles, cordless tools, and much more. Over time, these batteries wear out; thus, running down quickly or not getting charged at all. If you are facing similar situations then it’s time for you to look out for a solution how to recondition batteries. Discarding the old battery and purchasing a new battery is always a solution; however, it would be a costly affair for most of us. Another easy and pocket-friendly solution is to learn how to recondition batteries.

What Is The Meaning Of Recondition?

How to recondition batteries GuideRecondition means repairing the battery so that it becomes as good as new and can be recharged completely. There are different ways to recondition various types of batteries. The main cause of a battery wearing out is the effect of an undesirable chemical reaction that takes place slowly in the battery. However, many ‘dead’ batteries can be bought back to life by using the simple process of reconditioning. To skip all the basic information about batteries and reconditioning, go straight to the World’s Best Guide on How To Recondition Batteries which will help you to save a lot of money or start your own business.


Kinds Of Rechargeable Batteries:

Rechargeable Batteries

Within the use of electronic products, there are four basic kinds of rechargeable batteries that we use on a daily basis:

  • Nickel Metal Hydride (Ni-MH): The Ni-MH batteries can last for 3-4 years and have more number of discharge and charge cycles as compared to Ni-Cd batteries. However, when not in use, these batteries discharge more quickly. The most common examples of Ni-MH battery are laptop computers and mobile phones.
  • Nickel Cadmium (Ni-Cd): The Ni-Cd batteries have a good capacity and can hold stable voltage between charges as they are being discharged. These batteries often last for 1-2 years as they can undergo a limited number of discharge and charge cycles. The Ni-Cd batteries are used in biomedical equipments, power tools, professional video cameras, etc.
  • Lithium Ion (Li-Ion): The Li-Ion is the newest kind of batteries available in the markets. As compared to Ni-Cd and Ni-MH batteries, the Li-Ion has a longer shelf life. However, a disadvantage of Li-Ion battery is that it loses 10% of its useful capacity every year. So, a Li-Ion battery lasts for 4-5 years and can go through 400-500 discharge cycles. You can use these batteries in notebook computers.
  • Lead Acid Batteries: The Lead Acid batteries are the most economical form of batteries that can be used for larger power applications. Also, it is the oldest kind of rechargeable batteries as it was invented in the year 1859. These batteries are a preferred choice for wheelchairs, hospital equipments, emergency lighting, etc.

How To Recondition A Car Battery!

How to recondition Car Batteries

To recondition a car battery, you will require voltmeter, distilled water, syringe, acid, and battery charger. Here is the entire process how to recondition batteries  from your car:

  • The first step is to remove the battery from the car. Also, remove the rubber that is protecting the caps. There may be 6-7 caps in the battery. Ensure that you remove all of them.
  • Fill the battery with distilled water and recharge it with the help of battery charger for an hour.
  • You will notice some bubbles on the holes. If there aren’t any bubbles then reverse the positive and negative wires and wait for a couple of minutes. You will see some bubbles emerging.
  • Reverse the wires to the correct position, pull out the excess waste water from the top of the holes with the help of the syringe, and recharge the battery for some hours.

To kick start the process for some batteries, you need to replace the acid inside the battery. When you are filling the battery with distilled water, mix acid to the water and then pour in the battery. By following the aforesaid process, your car battery has been conditioned completely and now it has 70% of the power of a brand new unit, which is much more that what your car requires. So, recondition your car battery right away and save yourself from the extra expense of getting a brand new battery.

However if you want a proven and 100% working method you should try Ez Battery Reconditioning.

Lead Acid BatteriesHow To Recondition A Hybrid Battery!

Here is an easy way how to recondition batteries that are Hybrid:

  • Remove the battery from the car and clip it up with the conditioning equipment, which is connected to a computer.
  • There are 28 individual cells in the battery pack and it’s important for all the cells to operate in sync.
  • To know the exact health of the battery, take its power measurement and capacity measurement.
  • The power measurement will let you know how much time will be required to get electricity out of the battery.
  • The capacity measurement will tell you how much energy is stored in each cell.
  • Take the power test that will measure the resistance of the battery.
  • Use a discharger to remove the energy from the battery. Ensure that you measure the rate at which it comes out. Alternatively, check how much energy is stored in each cell.
  • Then, use a charger and put exact amount of energy back in the battery. This will let you know when the energy reaches 100%.
  • The data on the computer will help you to know how each module of the battery pack is performing and the effect it has on the performance of the car.

With the ‘conditioning’ process, you are removing the resistance barrier that was preventing the cells from receiving a full charge. Reconditioning will build up the capacity again and enhance the performance of the battery.

Recondition Laptop BatteriesHow To Recondition Batteries from A Laptop!

If your laptop battery is losing its ability to hold a full charge, then it’s time for you to recondition it! Here is the entire process to recondition a laptop battery, which works perfectly well for NiMH and NiCad batteries:

  • Let the battery stay inserted in the laptop. Plug in the laptop and allow the battery to get fully charged. Leave it for about 2 hours to cool down.
  • Restart your computer and disable the hibernation feature, which can be done through the Control Panel.
  • Next step is to discharge the battery by unplugging the laptop and making it run until the battery gets drained completely.
  • The laptop will shut down automatically. Leave it for 3-5 hours.
  • Plug in the laptop again and let it charge completely. Turn the laptop off for the battery to charge faster and to achieve best results from the reconditioning process.
  • Ensure that you change all settings done for the reconditioning process back to original settings.

When the reconditioning process is over, your laptop battery will be as good as new. However, this process will not work on lithium-ion batteries. Also, do not perform the reconditioning process for more than once a month as it may damage the circuit.

How To Recondition Lead Acid Batteries!

Learning how to recondition batteries that are Lead Acid can be dangerous as you are going to make use of acid. So, it is very important to take utmost precaution by wearing protective gears and being careful during the entire process of reconditioning. Listed below is an easy process to recondition Lead Acid batteries:

  • Remove the battery, clean it with water, and open the rubber protections. If there is oil stuck to the battery then you can use a dishwashing soap and a soft brush for cleaning it.
  • Depending on the type of battery, there may be different number of caps. Remove all of them.
  • Add distilled water in the battery and recharge it. Most of the Lead Acid batteries get recondition by this simple process.
  • However, if your battery is still not getting charged properly then you can use the aggressive method of reconditioning.
  • Once you have opened the caps of the battery, add acid and distilled water in the battery. Put the battery on charge for 10-12 hours.

The aggressive method should work and your Lead Acid battery will be as good as new. Some Lead Acid batteries may have damaged cells, so reviving them 100% isn’t possible. However, by using the aforesaid reconditioning process, you will be able to revive it up to 70%, which will provide enough power to most of the applications of Lead Acid batteries.

How To Recondition Batteries – NiCad!

Nickel Cadmium or NiCad batteries do not die in the true sense. These rechargeable batteries do not get recharged due to overcharging, over exposure to high temperature, continuous usage, memory effect, etc. The self-discharge sulfur crystals form inside the batteries and gradually reach the battery terminal; thus, preventing the cells from getting recharged. To get rid of the stubborn sulfur crystals, you need to recondition the NiCad battery. Here is an easy method that you could follow for reconditioning your NiCad batteries:

  • You will require a capacitor as it discharges high voltage quickly.
  • The capacitor from a disposable camera can be used for reconditioning the NiCad batteries.
  • Begin by charging the capacitor to a voltage that is 3-4 times higher than the voltage of the battery.
  • Connect the battery to the capacitor. Ensure that the same polarities are connected together.
  • When a high voltage is passed through the battery, the sulfur crystals get destroyed.
  • Thus, your NiCad battery will be repaired and can be recharged and used again.

Ensure that you wear protective gear and use caution while following the reconditioning process. Mishandling can result in electrical shock and severe injury. Moreover, to maintain the health of NiCad batteries, you should follow the reconditioning process regularly.

Bring any battery to life